A team of professionals at ETH Zurich have started work on a house which will be digitally fabricated at nearly all stages of the construction process. The so-called DFAB House is being crafted at the NEST building near Zurich in Switzerland. Designing and constructing it will be a team effort between architects, robotics specialists, materials scientists, structural engineers and sustainability experts, as well as local contractor Erne AG Holzbau. One of the main aims of constructing this house is putting sustainable technologies developed in labs to real-life use to test them.
When completed, DFAB House will measure 2153 sq ft (200 sq m). The ground floor walls are being built by a 6.6 ft (2 m) tall robot with a toolhead that is used to bend and weld 0.24 inch (6 mm) steel rebar to construct the mesh wall framework. This is then filled with a specially formulated concrete which hardens so that it does not leak through the gaps. This process will result in a curved wall, while the robot used to build it is autonomous and moves around on caterpillar tracks. The ceilings of the house will be constructed using a 3D sand printer.
The so-called Smart Dynamic Casting method will be used for the ground floor faÃ§ade. This is a new slipform construction method which allows for complex structural elements to be built without needing concrete molds. A team of robots will be used to construct the buildingâ€™s upper floors, using prefab timber elements.
Apart from providing apartments and work spaces for guest researchers and NEST partners, the house will also be fitted with a range of smart home and IoT technologies, including innovative systems that communicate with and learn from each other, as well as other energy control systems. The DFAB House is expected to be finished by the summer of 2018.